Simplicity Serge Pro SW432 Mechanical Sewing Machine "feed dog serger working" Questions

...feed dog doesn't raise far enough to feed fabric. Putting fabric in far enough to reach the back feed dog, everything works fine. Differential dial works fine. Lower the front feed dog The feed dogs ...

...not moving. Feed dogs on Baby Lock 5360E not moving? That normally happens if you are in embroidery mode, but not on a Serger. https://www.google.com/search?q=baby+lock+5360e+feed+dogs+not+working

...feed dog apparatus. It cannot be oiled from the outside, nor with covers off, but must be taken apart. If those lobes lose the oil and heat up you will feel "surging" then slowing repeatedly -- fast ...

serger keeps breaking needles Machine breaks needleschange needlesmake sure you are using the right needle for your type of machine.the presser foot may not be installed properlyuse the correct needle

why the feed dogs don't work bl4 428 serger babylock.com/support

...it was probably just the way it was threaded so I rethreaded the machine and noticed that the feed dogs are not moving. The machine works but will not pull the material into the

...Serger pro 432-- feed dogs will not pull material through. They do not come up high enough to catch the material. The most common troubles with feeddogs not working properly is either lint trapped in ...

...serger seams at 1500 stitches per minute and the thread streams off the cones so you need to ensure there is a good clear feed via the aerial to the tension dials. Buy good quality thread cones and ...

...feed dog My Janome 625e is about 1 year old. It has sewn beautifully until about a week ago. I have done a lot of applique work using this machine and have loved it. About a week ago the fabric ...

...foot, and feed dogs? Stitch width? indicates a problem with the sew direction level /knob or control if it is in neutral the dogs do not come up and the length of the stitch depends on the dog ...