...hand wheel clutch to engage motion of needle and shutter. if not check belt on downside of hand wheel open cover motor,loosen bolt cover see belt check if engage on pulley by holding hand wheel move ...
...hand wheel? Fashion Mate 5500 ... filled bobbin, inserted into case, hand wheel locked The hand wheel on a sewing machine is used to control the movement of the needle and the fabric. If the hand ...
hand wheel I have managed to wind a large amount of thread around the hand wheel on my Husqvarna. I have pulled most of it out using tweezers but still al small amount is left inside that I can't get.
hand wheel is not moving the needle at all Hi I was unable to move the needle at all using the hand wheel so was unable to check the alignment of the needle as you spoke of Check the hand wheel. There
...hand wheel does not turn the needle nor the foot pedal, but when the foot pedal is depressed, the motor is whirring. On the hand wheel there is the lock that is used to stop and start the needle from ...
...hand wheel On my singer the hand wheel has a smaller wheel inside the larger hand wheel that you push/pivet to release the hand wheel so you can use the bobbin winder, which I have done successfully. ...
Question about Kenmore Sewing Machines
Hand wheel turns freely by hand, but when motor engages, the belt turns, but will not engage the hand wheel. CENTER OF HAND WHEEL See the following 2 videos. https://youtu.be/pxjNofCkkbI https://youtu
hand wheel not moving I used the bobbin winder and returned it back to its position and it was then the hand wheel didn't work and needle doesn't move at all sounds as though the hand wheel at the ...
hand wheel turns manually, have oiled everything, hand wheel starting to turn slowly although very stiff. needle barely moving up up and down when hand wheel turned. since the machine has been setting
Question about Sewing Machines
...hand wheel, almost completely. 2. Now, tighten the hand wheel control knob. The needle should be able to move now. 3. Tighten the screw. Your hand wheel control knob should be able to be loosened for ...
8 questions posted
Usually answered in minutes!
76 Questions
45 Questions
40 Questions