needle bar goes down,keep on turning till the needle bar is fully up again, pull the end of the top thread to pick out the bobbin/bottom thread. With your material/fabric under the presser feet, apply
bar. Now bring the thread through the guide at the needle clamp. Push the thread through the eye of the needle from left to right. Leave a 3-4" tail of thread behind the needle. I hope this helps. The
...needle bar thread guide. Thread the needle from front to back. The thread should be along the groove in the needle. You can find the manual at Pfaff's Machine Update page: ...
...side of the last thread guide. So on your machine, since the last thread guide is in the front of the needle bar, the flat side of your needle goes toward the rear. The needle threads front to
Question about Singer Sewing Machines
...needle bar in the highest position (use the hand wheel). Place the spool on the spool pin (use the appropriate spool holder, if needed). Bring the thread to the first guide and get it to slide into ...
Question about Janome Sewing Machines
needle bar and/or threading mechanism. Try checking the needle bar and ensuring it is properly positioned and tightened. If the needle bar is not in the correct position, it can cause the needle to be
Question about Juki Sewing Machines
...needle bar. lower needle bar till mark shows and raise bar till even with bar guide. take off feeder plate so u can see needle in relation to hook. when mark on needel bar is even with bar guide the ...
...next thread guide located at the bottom of the chrome face plate (number 7).Hook the thread behind the thread guide on the needle bar assembly (number 8)Finally, thread the needle from right to
...needle bar thread guide. The thread won't stay in the needle bar thread guide, it slips down and off the bar. With the needle bar opening at the bottom, and the slope down, the thread won't stay on. ...
...the needle clamp and screwed the needle in but how do I secure the thread guide. did it shear off? Slide it onto the needle clamp from the bottom before you attach the needle clamp to the needle
19 questions posted
Usually answered in minutes!
760 Questions
564 Questions
372 Questions
252 Questions
263 Questions