Question about Washing Machines
...CYCLE SELECTOR KNOB - on an Ariston AV 105 Washing Machine Replacing the wash cycle selector knob on an Ariston AV 105 washing machine can be done with the following steps: Turn off the washing ...
...cycle until the knob is manually turned to rinse/spint/etc. Would this be a bad knob or timer or both? Thanks! Start a cycle and remove the knob. If it still stays in agitation mode and won't advance ...
...cycle, the pull to start knob in the center still works to turn it on when pulled out. Please advise Its sounds like you need a replacement knob, if you can turn the disc behind it to start a cycle ...
Question about General Electric Washing Machines
knob. The cycle selector and on/off combination is a poor design. Users press the on/off knob in and turn clockwise to set the wash cycle. If you're not gentle this action wears the teeth on the timer
...cycle knob and restart, but the machine will not continue the cycle. ok turn off unit at power switch, turn knob to drain and spin, and turn back on that will reset its programming and force it to do ...
...cycle knob turns reset and "a" through "e", turn the cycle selector 1 click clockwise from the position it is already in. This is the fault code display mode. Then press the start button. Each time ...
...cycle knob. I need to replace the plastic piece under the knob. If you are talking about the Cycle Selection knob, turn the washer to an OFF position, or unplug. I can't remember if you need to pull ...
...cycle knob turns reset and "a" through "e", turn the cycle selector 1 click clockwise from the position it is already in. This is the fault code display mode. Then press the start ...
Question about Kenmore Washing Machines
cycle selector knob wore out, washer fills, but barrel won't turn My washer 417.29042991 stopped washing! When I push the knob in to turn it to any wash cycle, it chatters like it's worn out and won't
Question about Ariston Technologies Washing Machines
cycle selector knob free-wheels? Turn on/off, wait try again. Please note that machine still works, but don't know what cycle, and cannot change cycle. Either the knob or the switch is faulty. Can you
1,338 questions posted
Usually answered in minutes!
874 Questions
371 Questions
398 Questions
323 Questions
255 Questions
