Question about kawasaki Prairie 360 ATVs
idle & run at slow speeds, bogs down at higher speed. Prairie 360 revs high but goes slow (45mph) - Kawasaki ATV Forum www.kawieriders.com > ... > Kawasaki Brute Force/Prairie/Bayou Oct 27, 2008 -
...idle speed down as low as possible to see if it will go into gear. If turning the idle down seems to work, turn the idle back up just enough to support running when the engine is warm. If your engine ...
...idle speed by turning eather the nob on carburator or the ajustement on the cable. then if the idle is very low and the clutch still engage (that is why you can not shift) you migh want to check at ...
Question about kawasaki Prairie 360 ATVs
...idle speed is too high, you may not be able to shift. Try shifting with the engine off to see if it goes into the gears, using the foot brake. If yes, try again while at low idle speed. pretty simple ...
...on the carburetor usually has a spring on the shaft. Turn it counterclockwise to lower the idle speed. It probably won't shift because the gears are turning too fast...assuming that it's an
Question about ATVs
in gear. The neutral light is on but it acts like it's in 2nd or 3rd gear. Any suggestions?? Is the idle speed correct? Too fast could cause the creep. Sometimes the choke is not returning all the way
...to forward (or reverse) the transmission slams into gear and kills the engine. Clutch ??? Clutch not disengageing or engine idle speed to high clutch may not be disengageing from engine speed to ...
...idle speed has to be low in order for the clutch not to engage the drive belt right away. The gear grinding was happening at idle speed. I pulled out the clutch weights and cleaned behind/under them ...
Question about ATVs
1999 polaris 500 sportsman, runs but as soon as i put it in gear it kills the motor,could use some help, thanks You may need to do a carb clean and adjustment giving it a higher idle speed.
Question about kawasaki Prairie 360 ATVs
...idle and driving around at low speeds. When I hit the throttle, though, it won't reach higher RPM and just bugs down. Throttle screw is set correctly and the only other thing I can see to adjust is ...
50 questions posted
Usually answered in minutes!
74 Questions
64 Questions
61 Questions
25 Questions
23 Questions