GE Profile Spectra JGBP90 Gas Kitchen Range "stove 100 degrees" Questions

...it turns off, anyone know why or how i can fix this? Stove top works fine, but oven only works to 100 degrees P8577204S E try RepairClinic.com. they have troubleshooting solutions for some ...

...STOVE PROBLEM WITH OVEN ON "BAKE." WHEN OVEN IS ON "BAKE", IT WILL NOT GO OVER 100 DEGREES AND A LIGHT THAT SAYS "ON" COMES ON AND WILL NOT GO OFF. NO MATTER WHAT YOU SET OVEN ON, IT WILL NOT GO OVER ...

...100 degrees checked the thernostat and it's not that if its electric i would check continiuty on the elemnets or perhaps a faulty high limit thermostaton back wall of unit, if gas stove , most likely ...

...stove with the numbers listed above. Thanks. Hi thanks for the question. the problem you are having is with the igniter. it does not get hot enough to work at 100 % . replace the igniter. thanks te ...

...100 degrees, and never heats. The broiler works fine, and the stovetop burners work fine. The cleaning cycle works fine. The glow plug underneath the over floor need to be replaced oven or broiler ...

...stove is getting very hot Hello there: Magic chef ovens and various other models of ovens have this no cancel feature this is due to the intense heatthat is generated during the cleaning process ...

stove still works fine, so I know that the gas supply is working. The electricity is fine because the digital display works but when I turn on oven the display only goes to 100 degrees and stays there

...WORKS, BUT BAKE WILL NOT COME ON. THE CLOCK AND TIMER ALL WORK JUST STAYS ON 100 DEGREES WHEN BAKE CYCLE IS MASHED. PLEASE HELP. sounds like a bad bake ignitor, common issue with all gas

...stove does We have a GE Profile gas oven model # JGS968SEK!SS. When I turn the oven on it says 100 degrees but than never warms up. This happened before and then suddenly it started working. Now it ...

...100 degrees stove top works but oven does not heat up past 100 degrees. for a ge profile stove Hi It sounds you need a new control panel circuit board. hope you will be helpfull Thanks for contacting ...