...pilot does not light. The broiler will not work. The only thing that does is the light. GE XL44 range. The burners light and the pilots stay lit. If you have standing pilots, make sure the pilot for ...
...pilot light is lit to light the main burner. First off, is your pilot light lit or is the igniter lit. There are two thermal sensor in the oven. One is above your pilot light and will not let the ...
Question about Hotpoint Kitchen Ranges
...pilot not lit. no more snap - snap and does not light GE xl44 stove - how do I fix the stove top. Does not light. No more snap - snap - snap when I try to ignite. relace spark module if no snap snap ...
Question about GE Kitchen Ranges
...Range. It is an electronic Ignition model. All four on top light no problem. Neither oven nor broiler will work but was working fine yesterday. Thanks for any advice! where do I find the pilot
...pilot stay lit if not through this ceramic knob? I have a GE Gas Stove XL44 the stove top buners don't light by themselves without manual lighting. When I turn on the buner knob the buner doesn't ...
...pilot light????? This Randy again. I checked out the top of the stove as you suggested and found every thing to be ok. Where might the pilot light be located on this ge xl44? this unit is about 13 ...
...feature? I just converted aXL 44 from natural gas to propane and I don't have a manual for it do I need to do anything for the oven part? Also how do I light the pilot light or do I need to? ...
...pilot light is still lit in the oven though it its not as high. its just when i turn the oven dial i get nothing it is also the same when i try to light the oven manually the pilot light is there for ...
...pilot light lit, as far as I can see. I am unfamiliar with this model and I need to know if this unit has a pilot light like most gas ranges, and what the error means. I am hoping it means I have to ...
...pilot light. Where is the pilot light and do you have any other suggestions? There is no pilot light. it uses a glowbar style igniter. The problem is usually the igniter not reaching the correct amp ...
1,583 questions posted
Usually answered in minutes!
390 Questions
104 Questions
83 Questions
77 Questions
70 Questions