2013 Hyundai Elantra "brake cables parking" Questions

Ad

Question about Hyundai Elantra

1 Answer

PARKING BRAKE/ HAND BRAKE HAND BRAKE RELEASES BUT REAR BAKES WILL NOT Check the cable to ensure it hasn't been stretched. Does it have tension on it when you release it? It should have. A stretched ...

Ad

...Parking brake cables are broken, rusted or frayed. You need to replace this cables. Driving around like that will cause the rear brakes to overheat causing probably damage to rear brakes and

Ad

occassional shrilling sound when I turn to park my car...back brakes were fixed less then 1 month ago...2nd time for the back brakes to be fixed....40,000 miles on car....the sound was not there ...

Question about Hyundai Elantra

1 Answer

...parking brake lever with normal effort. maximum travel should be 6 to 8 clicks 3.remove the console and adjust the cable length by turning the nut on the equalizer 4.recheck the parking brake stroke ...

Question about Hyundai Elantra

1 Answer

...releasing when you release the hand brake. Possible causes: -binding or stuck cable -broken parking brake handle ratchet mechanism -seized calipers, or if drum brakes faulty drum brake ...

Question about Hyundai Elantra

2 Answers

...it bulbs are good.....don't know where brake switch is Please Help it could be related the connector cables thats bridging your lights and your brakes???? brake switch is near your brake

...brake cables to see if they are stuck. Also, brake pads have small pieces of metal formed into the pad, hence the name metallic pads, the pads may have "rusted" to the rotors. You might try spraying ...

...Car will start and runs fine. We just can't get the gear shift to move out of Park. check for the brake switch if this doesnt work wont release from park if this ok then i will check the shifter ...

Question about Hyundai Elantra

1 Answer

Air bag module location Hi they are usually under the center console near park brake lever. Or forward from that under the dash look for a small metal box with yellow cables going in to it. Good Luck

brake lever stroke. You may not have to remove all of these pieces, just enough that you can access the adjusting nuts. Make sure both cables have tension, they are famous for breaking, and making the

Not finding what you are looking for?
2013 Hyundai Elantra Logo

31 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Hyundai Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...