...Door Stop adjustment is there an adjustment on the side by side to have the doors stop at 90 degrees? I have it next to a sliding glass door and I'm waiting for the handle to bust through the ...
...door so it will stop at a 45 degree angle rather than swinging on back? check the level of the fridge. If you adj.till it is level the door will stay wherever you stop it. Usually they are adjusted ...
Question about Refrigerators
until you close it. If it swings either closed or open when you let go of the handle, it's not level. The door stop is there to keep the door from opening too far. I added a bracket to the hinge cover
Question about GE Refrigerators
...door stop on the lower right side of refridge The door opens to 180 degrees and slams or bumps the handle up against countertops. We need the small pot metal part with the flange that attaches to the ...
...door stop screw from the bottom hinge. 3. Hold the door open to a position that is less than 90°. 4. Replace the door stop screw in the bottom hinge and tighten. NOTE: If you are using ...
...for the door could be too hight , causing it to miss the door stop . There should be a spring under the door that attaches to the refrigerator box. The spring may be broken and thus door won't ...
stop ice buildup in freezer Check the door seals, use a strip of paper and close the door it should have a resistance when you pull it out, if not and the seal looks good the door needs adjusting, if ...
...door stop or something on it? Without seeing it.Check to see if the unit is level.If it is, You may want to remove everything on the door and see if it still happens.If the problem still exits, you ...
Question about Refrigerators
...door. The beeping should stop if this lever is pressed. If the door is positioned correctly it would depress this lever when closed. It may be that the door adjustment is slightly out. If the beeping ...
1,218 questions posted
Usually answered in minutes!
3,171 Questions
305 Questions
304 Questions
262 Questions
