GE Profile JTP18 Electric Single Oven "set day clock" Questions

day must be set before any other program can be used. When your oven is first connected to the power in your home, the digital display will show 00:00. To program the time-of-day: 1. Push and hold the

...set the time of day. 3. Press CLOCK or START/ENTER. To Disable: The clock time can be disabled so that it does not show on the display. To disable, press and hold CLOCK for 5 seconds. To display the ...

...5 or 6 - +until the correct time of day is displayed. Release the buttons. The clock is now set. • Please note that the clock has a 24 hour display. • For example 3.00 PM will be displayed as ...

...set current time of day. 3) Touch CLOCK or ENTER to start clock. 24-HOUR CLOCK The time-of-day clock can be changed from a 12-hour clock to a 24-hour clock. After the clock has been set, touch ...

...for 1:30. Press the numbers 1 3 0 to set the time of day to 1:30. "CLO" will disappear after 4 seconds and the clock will start. Or you may press Start. "CLO" will disappear and the clock will

...control panel. Look for a setting that says "Clock" or "Time of Day" and set it to OFF. If you don't have this option on your oven, contact the manufacturer directly and they will be able to help

...controls on. Is there a fuse or is my control board out? If the clock is working, you know there is power to the cooker. Make sure its npt set to auto cook and set the correct day time on the

...that the pilot lamp clock flashes on the display. 1. Press the + or _ button. 2. Set the clock and wait 5 seconds: the time of day pilot lamp clock will go out and the display will show the set

SET THE TIME OF DAY Press the Cook Time button and the Ready Time button simultaneously. Use the Plus and Minus buttons to set the time.(24hr clock). TO SELECT AN ALARM TONE. Press the Minus button to

...day. to set time of day. press centre button 4 times lamp flashes in bottom righthand of display. use + and - to get correct time after 10 secs time will lock in. to check you have not set count down ...