...off the screws that clamp the door catch/actuators in place whilst holding the door closed and then tightening the screws. The rear of the door may be adjusted by slackening the lower door hinge ...
door has come loose. Can I replace or tighten this myself? DON'T remove the cover yourself unless you fully undertand the SAFETY issues involved in working inside a microwave oven. A microwave oven is
...door is closed. The solution is to realign and tighten the mount screws inside. It's less liekly, but it could be a weak or worn door open lever inside. I only advise people to work on a microwave if ...
...tighten to make sure that the hook of the door should activate them. One of door switch push Button won't release and possible burn out. Had a similar problem and the door switch mounts had gotten ...
...door. Not sure on the Maytag. However, when you get the lid up, (it should be hinged at the back), set the burner pieces back on. (These burner pieces HAVE to be there or you'll just have a ...
...door closed, tighten the screws. Put the cover back on. That's it. Yes, thak you all! This microwave is a total POS and we have had to fix the computer as well as the cheap plastic handle which broke ...
Question about Akai Microwave Ovens
...properly due to the lever that contacts the switch being loose(probably a screw that was not tightened properly during assembly at the factory, or even the screw that secures the switch unit ...
25 questions posted
Usually answered in minutes!
3,405 Questions
567 Questions
285 Questions
308 Questions
257 Questions
