GE Spacemaker JVM1640SJ Microwave Oven "problems door glass" Questions

...carefully and gradually work your way around the perimeter of the door glass and make sure it snaps back into place. If you have questions about this repair, please let me know. I hope this helps

door glass and make sure it snaps back into place. This repair can be done with the door in place, or you can remove it for easier access. If you decide the remove the door, simply open it all the way

door glass and make sure it snaps back into place. This repair can be done with the door in place, or you can remove it for easier access. If you decide the remove the door, simply open it all the way

...glass door on GE Spacemaker I was making a microwave meal and the steam somehow got between the door so now I have this steam mark showing on the outside of my microwave door and it looks liek the ...

glass part of door. Took door off, removed handle. Is there a way to access the inner surface to rid grid of rust? It would appear that no one knows how tofix this problem. I have the same problem and

glass on the door of my over the counter microwave/convection oven. Is this a problem? How can I clean this? Microwave is only 6 months old. HELLO.Yes.Water can only drip between the glass on the door

...glass. Tried to lightly tap the door to make it fall down but that does not work. I called Whirlpool Corp and told them about the problem. They are sending a factory authorized repairman immediately ...

...door shut can easily blow the microwave fuse, but they can also blow due to problems with the interlock switches. A microwave oven will not function until the fuse is replaced.Instruction on how ...

...door is opened or closed such that the light flickers off and on. I thought the bulb was loose, so let the glass plate down to inspect the problem. Seems the socket is loose. Can I lower the whole ...

...door a plastic or vynil strip around the metal frame and glass screen, this border strip is snapped to the metal frame and you can easily remove this by using a small knife to un-snap the plastic ...