GE Spacemaker JVM1640SJ Microwave Oven "advantium error code" Questions

Error Message My GE Advantium oven shows an F3 error message on its display and is inoperable. What does the F3 message mean and how is it corrected? Todd Anderson [email protected] it was working

...stops cooking and gives me a F1 code http://geasupport.custhelp.com/app/answers/detail/a_id/16301/~/advantium-120-volt-error%2C-fault-or-function-codes Advantium 120 Volt Error Fault or Function ...

Error Message My GE Advantium oven shows an F3 error message on its display and is inoperable. What does the F3 message mean and how is it corrected? Todd Anderson [email protected] It needs a new

advantium 120 . The panel lights up I do not get an error code the timer works but it does not heat up. what could cause this Check your power setting, making sure that you are cooking at 100%. Adjust

ADVANTIUM 220 VOLT RECENTLY HAD KEYBOARD REPLACE, AND NOW GETTING F1 ERROR CODE WHEN USING SPEED CODE. LOOKED IN MANUAL AND COULD NOT FIND OUT WHAT THIS ERROR CODE IS? ANY HELP? THANKS! hi, F1 usually

Has a code F3. Had it unplugged, as it wouldn't start after selecting the micro setting? Code F3 now shows? f3 error code is for bad panel control and your panel control needs to be replace

...sensor Error message F2 on my GE Advantium 120 microwave oven please follow the steps use the VOM and test it. God bless you F2: Check oven thermistor for continuity. Replace if zero or infinite

...error what does f3 mean on your microwave, it is not that old and of course like everything else i buy I didn't keep any receipt on it. HI, the Key panel (touch pad) is shorted. This code will occur ...

...Advantium Microwave oven is beeping and giving me an F3 error code that is not listed on the troubleshooting guide. I need to turn the silly thing off. Clear is not working. What do I do? F3 on a GE ...

...Advantium SCA1000 where everything works except when trying to use the microwave function only. The unit powers up fine with no error codes. The oven and speedcook functions seem to be working ...