Turntable does not turn. Motor runs. Beaters work. Sunbeam Mixmaster Mixer on stand - purchased in 1977. Service # 1-7A. 225 watts, 120 volts. 12 speeds. Listed Mixer 423A. -- The turntable does not ...
blade will not turn power switch turns on motor but blade will not turn motor will hum but no blade turn if bottom seal worn and material leaks into shaft. Rekove drive head and try turning shaft if ...
Question about KitchenAid Food Mixers
The paddle on my kitchenaid won't turn. It just makes a humming noise. Any suggestions? I tried to turn a screw under the neck to adjust it The paddle will turn sometimes but won't mix anything then ...
Location of overheat reset button on Hobart HS 30s Turn your thermostat off by switching it to the off position. Find the breaker that powers your HVAC system and turn it off. Wait 30 seconds and turn
Question about KitchenAid Food Mixers
...screws are for adjusting speeds from stir to 6, the lower one is for adjusting speeds from 6 to 10, Turn the screw on the top left to the left a quarter turn while the mixer is in the stir position. ...
Question about KitchenAid Food Mixers
blade is hitting the bowl and the screw will not turn anymore I tried to adjust the screw so the blade would not hit the bowl, but it will not turn to the left any further. Does ant one know what is ...
...mixer. One beater not working My Sunbeam 2485 has a great moter but one of the beaters does not turn. I had taken the mixer apart and discovered a small metal spring pin was not attached. This
H-600 Turn Handle slips, bowl does not go back down Turned the handle like always and now the bowl does not go back down, handle turns with some noise Does the handle seem to move easier?there is a ...
attachments won't turn my attachments won't turn anymore. the motor is working but no turning takes place. Also how do you get the machine apart to see what is broke? most likely a stripped worm gear ...
43 questions posted
Usually answered in minutes!
166 Questions
128 Questions
72 Questions
22 Questions