Kenwood KM305 Stand Mixer "age unit" Questions

...Model -10. Where should I look/ One of the nylon beater gears is broke. I need this replaced. Chero, unfortunately because of the age of this unit Sunbeam stopped production of the internal

...age, the motor brushes will wear out and fail to make contact inside the motor. The missing sound you are describing is probably a burnt spot on the armature where the brushes are not transferring ...

unit?. Sounds like the armature is poling, ie rubbing against the windings. This normally happens when the bearings are worn - hence the question about age. If it is not in the motor section, it could

number The model number seems to be valid-but given the age of the unit few parts are readily available. You might want to try eBay or a used appliance store (or even Goodwill) to find a donor machine

unit? Thanks, Anne Hi Anne. Call your nearest Hobart parts place. The parts guys will be able to tell you the age and which plant it was manufactured in in the USA. Another source is the hobartservice

unit? One of two things should cause this. First, is the mixer really old, or has it operated in an extreme high heat area ( for example, next to a oven or stove)? Grease is a mixture of oil and soap,

...age of the unit, some noise is to be expected. The lubricant used in the planetary is different than that of the main transmission and is not visible without disassembly. Again, depending on age of ...

...unit. Usually letters followed by numbers. However there is no adjustment unfortunately, It could be a manufacture defect possibly. Or maybe damaged during the original shipping. The only thing that ...

...age of a Hobart Mixer serial number 1569386 Contact hobart directly, they tend to keep a record of machines, and would probably be able to as sit you Hello, Yvonne - The Whirlpool Corporation ...

...age of the unit, the service department has no drawings nor parts diagram that give a clue as to where this part goes. The mystery part is cylindrical and looks like a roller bearing with a hole ...