Hoover Ja1600 Jazz Upright Vacuum Cleaner "vacs cord" Questions

I was using kirby g5 and I think I stepped on cord and lost power on vacuum. Now it won't start. Could this be a damaged cord..or what? either that, or it was pulled so hard, it came disconnected from

switch on but no power First thing to check is to see if the cord has a broken wire, either at the plug or where it enters the vac. Frequent flexing of the cord often causes one of the inside wires to

I have a Miele Capricorn canister vac. I have replaced all the filters (hepa as well) and the vac keeps shutting off while in use. have the cord reel checked. There could be a short in the cord

...cord problem. Switches on these vacs break more often than cords. What you see on top is the switch button, not the actually internal switch, however a switch does not normally fail while the vac is ...

...cord/wire? why not fit a longer length to facilitate more reach thro different rooms from the preferred wall socket ? the problem of short /breakage of wires within outer sleeve near casing is common ...

my kirby legend II started spitting out sparks near the foot plug. How can I fix it please? Thanks Candy Depends where the sparks are spitting from.Unplug from the wall and try to detach the cord from

I have an Electrolux EPIC 6500 SR canister. The power cord is pulled all the way out and will no longer retracted. How do I fix this? try pushing the cord back in whilst depressing the retract button ...

...cord+on+upright+vacuum I have replaced cords on several vacs. Unplug, take all screws out to gain access. Usually it's just two wires to disconnect and two to affix in their place. As an easy way to ...

Cord Heats Up We purchased a Hoover Wind Tunnel Cyclonic a month ago but the cord heats up. The happens very soon while in use. Is this dangerous to the vaccum? What can be done to fix it? You have ...