Whirlpool WED5520SQ Gas Dryer "motor start button pushe" Questions

...motor hums while start button is being pushed. if the motor hums when you push the start button but wont move you probably have a frozen motor. happens from too much lint packed around the motor and ...

...start button and motor hums. Whirlpool Electric dryer. Push start button and motor hums, turn drum slightly and i hear a click from the motor. Close door, hit start button and it starts. thermal ...

...all I hear is a buzzing sound. Do not know if it is the push button start switch or could it be the thermal limiter. Hi If when you push the start button & It humms Its a bad motor replace the ...

...motor should start. When it starts a mechanism in the motor operates a switch mounted on the motor (provided w/new motor). That makes a circuit which replaces the action of your finger holding the ...

...start and motor hums, but nothing else works. When I push the start button the motor hums but nothing else happens. Kenmore dryer, model # 96375800 Hi, If you release the start button, does the hum ...

...the drum and push the door switch in and have someone else push the push to start button and see if the dryer will start,if the motor has a flat spot it could start like this.let me know what you ...

...motor to energize the start winding until the centrifugal switch in the motor energizes the run winding. If the motor is not trying to start, I would next test the start switch & related ...

start turning. If I push the button 3-4 times in a row, it hums each time until about the 4th press of the button. Then it just sits quiet. If I let it sit for awhile and push the button again it will

...start. The motor is weak and needs replaced, don't hold the start button too long or you may smoke the motor's thermal protection and it could get smokey and stinky. Make sure you can get the blower ...

start the motor turning. From there the stator will drop out of the electrical process and at the same time the run winding, or rotor, will take over and the motor will continie to run. Your stator is