#s) telephone number to be stored for the selected speed dialing station #. Press "PGM" button again to complete the storing of the tel #. Test, after dial tone, by just pressing the selected station
SPEED DIAL HOW DO I SET UP THE SPEED DIAL station speed dial: redial, speed dial 10-49 telephone number redial [email protected] Tony
...So I guess that means you're not programming SYSTEM speed dial numbers. Those are programmed from the system manager or operator's station. Personal speed dials are 1-0 and are programmed per set. ...
...station, pressing the speed-dial button for another station's station number will page that station. Now, how to properly initiate an intercom conversation differs between announcing to another ...
Question about Executone Lands Phones
STATION SPEED DIAL # 'S from the phone press program key, than 01 for speed dial 1 and then the phone number you need to program in under speed dial 1, after done, press program key. to dial out press
...dial numbers 10-99 will be station speed dials and 100-999 will be the system speed dials. I included a website with manuals below. Hope this helps. ...
...station speed dial. If you press Intercom #66 and enter speed dial numbers 100-999 will be system speed dial. Hope this helps. I included a site below with program manuals. ...
...This rule applies to all system speed dial, station speed dial and speed dial key. It looks like you're just going to have to add a leading 9 to all the speed dial numbers for that function to
...the phone, rather than simply Station # -dial 690 -up to 7 characters, enter name - A=21, B22, C23 / G=41 ,H=42,I=43/ W=91, X=92, Y=93,Z=94, etc.. -press SPEED to save *to erase -dial 690 -press ...
station speed dial, but can't figure out how to enter the phone numbers. The manual from the GE web site is here: http://www.home-electronics.net/ge/pc/IB/29267GE3_IB.pdf It's a pretty straightforward
107 questions posted
Usually answered in minutes!
1,197 Questions
619 Questions
465 Questions
463 Questions
293 Questions