Panasonic KX-T7730 Corded Phone "co line programing" Questions

...CO line you wish to program. If you are not sure which CO line is missing, check the button programming by the same method. Press program button then any programmable button and it will be identified ...

...CO line Hi, I am using KX-TA824 / KX-T7731and when I press 9 to seize an idle co line it will go to the last CO (CO# 6 in my case). But have only 4 CO connected lines! Can I program the system to ...

...CO not assigned"but the line already plug in . In analog system like the KX-TA series, the lines have to be both installed and programmed to a set. System program 400 sets the lines and pressing ...

...CO line down to another division of our company. Now when we hit SP-Phone to dial out we get a dead line. How do I program the phone to set the CO as a new line? program 99 press the desired co line ...

...co line One of our CO lines has been moved to a different location. However, when we pick up the phone to dial out we still automatically go to the dead line. How do I completely remove that line? ...

CO) Line Buttons? The manual doesn't say! I've been trying for weeks to add some different outside numbers to the CO line buttons. Some are already programmed which work perfectly, and dial out when I

...Panasonic KX T7730 | eHow.com http://www.ehow.com/how_7159736_program-panasonic-kx-t7730.html#ixzz1eYPzbevZ go to program 400 and disable 8th CO line dial line selection number 9 and make outgoing ...

...CO lines under buttons is done from the set itself and involves PROGRAM a button and dialing 0 + the line number 001-008 and STORE. That makes the line appear. Ringing and other functions are done ...

...CO line through my PT phone it shows CO not configured. Doesn't panasonic automatically recognized new col lines ? No. At the very minimum, you need to go to program 400 (3.3 in the U.S. Maintenance ...

...CO) line button how can i program the outside (CO) line button in KX-T77730 press program button then press the flexible where you want program the CO line then press 0, here u can select which CO ...