Panasonic MC-V9634 Canister Vacuum "reel" Questions

...on. Mine was a simple fix. Hope yours is too. You need to take the unit apart to get to the cord reel. If you don't know how to take your unit apart, here are some instructions on how to take

Schematic on a TSC10SA BAIT CASTING Putting reel back together, so I am looking for the manuel I'm sorry, I don't have information on a specific TSC10SA bait casting reel. However, most baitcasting ...

Power cord broken inside reel Power cord is broken inside auto reel. I need to get the u shaped spring stop off the outside to get inside the reel. I can not figure out how to get the reel apart. the ...

there should be some screws to take out, and the top and bottom should separate. Don't let the cord reel spring unwind if it hasn't already done so. If it hasn't, one half of the reel should come aprt

...the cord real unit or can I repair it somehow? And If I can repair it, how? If you can get into the reel unit check and see if you have a broken wire . I had one like this and I repaired the wire and ...

VACUM CORD REEL REPLACEMENT MODEL NO. UH70212 POWER CORD REEL REPLACEMENT you can get the cord reel from the link below http://www.ereplacementparts.com/hoover-uh70212-windtunnel-series-vacuum-parts-c

Cord not rewinding Cord reels are great when they work but if you get a bad spot on the cord or plug or the reel won't retract on most vacuums you will have to replace the cord reel.

...off. one screw in the bottom and two on the top. need a flat blade screw driver to pry out the cord reel. 4 screws holds the sheild of the reel. take them out and there is a snap ring that hold the ...

retractable cord when I pull the cord out, it won't stay pulled out. It just reels back in without pushing the button on top of the canister. what's going on with it? Replace the cord reel no need to ...