Removing Impeller What direction does the impeller come off to replace, Rotation is clockwise right tight left off Impellers unthread counter clockwise.
...impeller and remove it by turning clockwise (if applicable). Once the impeller is off, you can remove the four through bolts from the rear of the motor using a 5/16 nut driver and the wet end should ...
How do you remove the impeller from a Waterway Executive 48 spa pump Take off the back of the motor, put a wrench on the shaft and turn the impeller by hand to loosen. It may be reverse threaded.
remove the impeller on a 4hp Speck pump...I've worked on several 3/4 to 3 hp pool pumps but this one is a first...also, how is the seal plate attached? maybe I'll figure that out if I'm able to remove
the impeller to the shaft. Alternately, the impeller may be screwed on to the end of the shaft.Remove the impeller and seal from the shaft.Inspect and replace the impeller and seal.Reassemble the pump
Question about Pool & Spa
out center bolt. To remove the impeller you will twist the impeller off in a counter clockwise motion. However, the impeller cannot be freed from the motor shaft without first securing the motor shaft
...remove impeller on Pentair ultra-flow pump My pump is leaking so I want to change the seals. therefore I have to remove the impeller. I hold the motor shaft with a flat screw driver but I ...
remove the impeller. remove back cover of mtr. hold shaft with large screw drver. remember some modles have rev. threads I have a A.O. Smith 3 HP 2 speed spa motor (BN61) that the impeller had failed.
103 questions posted
Usually answered in minutes!
38 Questions
