Question about Everest & Jennings Health & Beauty
...wheelchair is adjustable in height based upon the position of the front caster wheel axles and rear wheel axles. Raising the axles lowers the chair. Lowering the axle postion raises the chair. If the ...
...casters on my probasics wheelchair. I am not sure what I should order and whether the tires come on the wheels ot what. As a general rule, it is best to replace the caster as a complete assembly ...
My mother has a 1818R Probasics full reclining wheelchair. The front caster fork assembly bent, probably due to the fact that we take the chair out on walks in forest preserves. Where can I get a ...
Question about Invacare Health & Beauty
...of these chairs without any tech help. Thank you. You will need to remove the rear tires and front casters. If you look at the front caster fork there should be some extra holes where you can ...
front caster wheel has cracked rim, what is correct replacement size? Bob I can't answer without knowing what chair you have. contact tech service at Drive Medical @ Toll Free Phone: (877) 224-0946 ...
have breezy ultra 4 with 6 inch casters. want to change to 8 inch. can the 8 inch wheel/tire be mounted in my original forks, or do i actually have to also purchase different forks? PLEASE VISIT THE ...
8x1 3/4" but you can also get 8x2", and some of these have a solid hub (solid center, no spokes). Check with your local wheelchair repair shop or where you bought it from to get the wide front casters
do wheel berings need maintenance do the small casters wheel berings need maintenance No, by the time the wheels wear down the bearing will still be good.
Question about Pride Health & Beauty
the 4 caster wheels turn independently preventing accurate turning or backing up You may need to lubricate the wheels and where they pivot on the frame, otherwise that's the way they operate normally.
...is not hitting your drive tires. Check the bearings in your caster wheel assembly to ensure the casters can turn freely. The back outrigger has a pinch bolt in the middle, tighten it all the way ...
231 questions posted
Usually answered in minutes!
78 Questions
7 Questions
5 Questions