...gun will not fire Check the date of the bottom of the gas. With the gas removed when you fire it you should hear a faint spark sound from the top. If gas is in date try putting it in your pocket for ...
...either has (a) insufficient gas, (b) the nozzle is not correctly fitted (c) the metering valve is faulty, if the can emits gas the gun will need to be checked for spark and the seals will need ...
...gas fired nail gun; First the obvious user faults; Low battery Low gas Nail guide jam Not so obvious; Broken/worn return springs (nail guide and firing bolt) Faulty micro switches Bent or impacted ...
Question about Hitachi Tools & Hardware - Others
...gun stops nailing. What might I being doing incorrectly? Dan Does the fan run and the light blink ont he nailer? I have one that I just bought. I put in the wrong type of nails and got one stuck. I ...
gun does not fire could be gas problem. (check in date, yes it does have a use by date), another cause of not firing is a broken wire particularly around trigger switch (switch is on trigger and hence
...gun gasses up, fan woks but doesnt fire when trigger is pulled. at first was intermitent then stoped firing altogether. there is gas there and fan is working but not firing Various reasons, secondary ...
Question about Omega Tools & Hardware - Others
...gas cannister is full. The gun is making all the correct noises that occur when firing nails, however, it doesn't fire nails. Give it a thorough cleaning.. if it still does not fire you might have to ...
Question about Omega Tools & Hardware - Others
...gas chamber is full. But the gun will not fire. I have notice the nails jammed one time I was trying to use the gun. Than the gun stopped firing. Have all the nails been cleared out of the tool where ...
Question about Tools & Hardware - Others
...on fan on gun cleaned wont fire gun cleaned battery ok gas ok fan on Does it flash when you pull the trigger? Does the fan start? What model? Is the gas in date? Is the inlet valve the correct way
Question about RTO Tools & Hardware - Others
...gun. I removed and cleaned the spark plug cover, dried everything in sight. I added a couple of drops of oil (all products are Paslode ones). I put in a new gas cartridge. (Yes, I did check that the ...
107 questions posted
Usually answered in minutes!
5 Questions
3 Questions
1 Questions