...gas expiration date on bottom of cannister,change gas to current fresh date. Also open nose of nailer and see if a fastner has logged ,remove and push plunger pin back into body,be sure to remove ...
...hear a faint spark sound from the top. If gas is in date try putting it in your pocket for 10 minutes to warm it up. Open the front and make sure the piston is pushed all the way up into the
Question about RTO Tools & Hardware - Others
..., or the spark is not sparking in the correct place, chaffed ignition wires. is the gas you are using in date, there should be a date stamp on the gas bottle. if its out of date it can give
...gas full, but what is the expiration date, it is located on the bottom of the fuel cell and if out of date can cause a problem. Second when was the last time the tool was taken apart and completely ...
...gas) and best before date(expired date) 2.If fan isn't working check that the battery is fully charged. 3.Make sure filter is clean and you can see through it.(no dirt or grit) 4. If after that it ...
...is gas there and fan is working but not firing Various reasons, secondary switch faulty. gas out of date, gas is colld, iar leak, faulty spark unit. Suggest you get it checked out at a repair
Question about Tools & Hardware - Others
...on fan on gun cleaned wont fire gun cleaned battery ok gas ok fan on Does it flash when you pull the trigger? Does the fan start? What model? Is the gas in date? Is the inlet valve the correct way
...gas in date? Try warming the gas first by putting it in your pocket for 10 min before use. You may also have an air leak, when was it serviced last? Remove the head assy and reconnect to see if it is ...
slow gas loading between shots New cyliders now have expire date on bottom of cannister. If old will not fire properly. Put new fuel cell in should be fine.
battery fine gas in date,just does"nt fire. Try claening the gun and or activate the fuel cell first
107 questions posted
Usually answered in minutes!
5 Questions
3 Questions
1 Questions
