...blocking it, the release on the side is engaged. Don't have a manual to troubleshoot. Help! when i turn on my treadmill, it runs for a few seconds. Then it turns off and an E2 appears. what is ...
Question about Nordic Track Exercise & Fitness
cant close my nordic track a2050.... its stuck open...not very space friendly Does it close part-way? If so, it might be the same thing that happened to me. Make sure the incline is at zero. It will ...
...its fine only just started your belt is probably loose. does it slip or skip when you step on it? Turn it over it has adjustments on the underside or somewhere
...and go to the back of the machine. If the belt is rubbing, find the left adjustment bolt and turn the screw 1/2 turn clockwise. Now, by hand move the belt a couple revolutions. If it still
Question about Nordic Track Exercise & Fitness
...was open (unfolded) and I wanted to close it because I nearly killed myself tripping over it, so I turned it on to lower the incline so I could close the unit, and I had the safety magnet in place
...when walked on. Run the treadmill @ 3 to 4 mph, walk for a few minutes, Using the allen wrench, turn both rear roller adjustment bolts clockwise, 1/4 of a turn. Then repeat adjusting procedure ...
...screws at the rear of the machine. If the belt is shifting to the left, tighten the left screw (turn clockwise) and the same if the belt goes to the right, tighten the right. Only turn the screw
My proform C500 walking belt quit turning. I can still hear the motor start up and the console works, but the belt is not spinning. Is this something I can repair on my own? check under the hood your ...
...of the back roller. If the belt is too close to the right side, your going to want to tighten (turn clockwise) the allen wrench. If the belt is too close to the left loosen (turn counter ...
16 questions posted
Usually answered in minutes!
61 Questions
46 Questions
56 Questions
38 Questions