Uniden TRU8866 Cordless Phone "registering second 6" Questions

6 for information on the available model. Registering a handset to a base unit The supplied handset and base unit are pre-registered. If for some reason the handset is not registered to the base unit,

will not register Hi , Just bought two refurb handsets (2080) We have four already installed We had lost two, so these are rplacements. One registered fine as #6 the other will not register Hold the ...

...second handset I get an error that states 'no connections'. The user manuel dose not have a trouble shooting section. Open for assistance. Thanks This is the registration procedure Step 1: press ...

one base can register 4 hanset in EEPROM setting. The model, Maybe you can try press the "page" key, then plug the power cord , after 5 to 6 second , release "page" key. Try to register handset again

...6 Handset:Press {OK}, then wait until a long beep sounds.Note: While registering, “Base in registering mode” is displayed on all registered handsets. When you purchase an ...

...Registering will appear in the LCD.6) When the handset has registered to the base, the LCD will display Registration complete then show the handsetID number.If the display shows Registration failed, ...

We replaced the base unit and can not register our existing handsets because they were registered to the previous base unit. Once registered the handset's menu doesn't offer a register or ...

...it shows the phone symbol 00 and it says please register and I try to register with menu 6 1 and hold Reg button for 2 second all the light lit up on handset says no connection PLEASE HELP it is ...

second one. 2 disconnect the phone line from the phone jack. 3 removed both batteries. 4 wait 15 minutes 5 reconnect the batteries. 6 reconnect the phone line. 7 plug in the AC Adaptors on both phones

I need to deregister missing handset #1 I bought a refurbished tcx905-s which came with two handsets but thinks it has three. I need a way to deregister the missing #1 handset so that I can see ...