Question about Uniden Lands Phones
REGISTER THE TCX905 WITH THE TRU8866 and everything works fine.... Just removed the battery cover and it worked. Thank you!!! I biught a TRU9496 base which was packaged with one additional 905 handset
...TCX905 Cordless phone Handsets # 3 and 4 will not register with my TRU9466 base. The manual recommends ''Resetting'' the handsets by holding down the [end call] and [#] keys for more than 5 seconds ...
...register..it says "registration failed" after approx 5 seconds on the handset...any ideas? SOLUTION: 1. First, remove the battery cover on your unregistered TCX905 and look under the battery to ...
...TCX905." Uniden, unfortunately, has programmed the expansion handsets from SINGLE LINE TRU9xxx phone systems to NOT REGISTER against DUAL LINE TRU9xxx BASE SYSTEMS (i.e. TRU9466, TRU9496, etc.). This ...
...register with our base. We are following directions in manual. Repeated process a number of times. MAKE SURE THAT INSIDE THE HANDSET THE MODEL TCX905 SHOWS, IF IT SHOWS A DIFFERENT MODEL IT WILL NOT ...
this true? Not sure about the refurbish issue...but have you tried to de-register the handset by holding down the end key and the # key, then placing on the main base unit to register with your system
...telling you to place the phone in the cradle of the base unit to register it to your unit. An "operation complete" message will confirm that the handset is now registered and ready to use. Good
...tcx905 will not register on uniden base tru8866 Remove the plastic battery cover from the handset (but keep the a battery connected), then place the handset on the base. That will enable the metal ...
...base will only register 10). How do I get them out of the base unit's database so I can register the new handsets as 1-4. Thanks! The brillian people at Uniden don't feel it necessary to provide this ...
30 questions posted
Usually answered in minutes!
3,453 Questions
1,326 Questions
1,157 Questions
514 Questions
232 Questions