press the "Find HS" button on the base for 4 seconds, then press the # button on the HS and wait.) The malfunctioning HS then registered! I then reattached the battery to the accessory HS and returned
press the down arrow to select HS setting, then registration, then register 2. My CDP 24106 base station does not have a "mute" button. In the instruction manual, there is an error and an errata sheet
...PRESS FIND HS 4 SEC ON BASE does not appear on the handset screen after a few seconds, remove the handset and place it in the telephone base again. On the telephone base, press and hold FIND HANDSET ...
Question about Panasonic Lands Phones
...HS registration”{OK}5 Base unit:- KX-TG4011 series: Press and hold {LOCATOR} for about 5 seconds. (No registration tone)- KX-TG4021/KX-TG4071 series: Press and hold {LOCATOR} ...
...hs. If this error message displays on your handset, please follow the instructions below to deregister your old handset before registering a new handset. 1) On the base unit: Press: FUNCTION or ...
HS Registration" press soft key Select 5, Base Unit: Press and hold (LOCATOR/INTERCOM/TRANSFER) for 3 seconds. The Charge indicator flashes. After the CHARGE indicator starts flashing, the rest of the
...Press and hold the 'flash/find hs' button while applying power. 3.Wait for the beep and release the button. 4.The charge light will now flash. 5.Sit any handset in the cradle. 6.When the flashing ...
Question about VTech Communications Lands Phones
...PRESS FIND HS 4 SEC ON BASE does not appear on the screen after a few seconds, lift up handset and recradle it in the base or charger. Step 2: On the telephone base, press and hold FIND HANDSET for ...
...press the OK soft key. DEREGISTER HS appears. CHOSE A NUMBER THAT IS NOT ONE OF YOUR WORKING HANDSETS 4. Move the cursor to select YES, and then press the OK soft key. When ARE YOU SURE? appears, ...
30 questions posted
Usually answered in minutes!
3,453 Questions
1,326 Questions
1,157 Questions
514 Questions
232 Questions