...drum turning but nothing happens. I can manually turn the drum but nothing happens when it is on. Sounds Like the friction on the belt.If the drum got stuck the motor & belt keep turning plus the ...
drum has just stopped turning even by hand thanks craig If you cannot turn the drum by hand, then there are a couple of possibilities that come to mind. 1- it is possible the drum bearings have siezed
washing machine hard to turn If the drum is hard to turn you may have something in between the drums or the bearings may have siezed in either the drum or motor. Remove the belt if it has one and try ...
Question about Bosch Washing Machines
drum from turning; such as a sock falling into the tract where the drum rotates, or a bad seal. Check the drum for movement by hand, and see if you can free it up manually. Last: check alignment. Look
drum is stiff to turn Hello.The drum is very stiff to turn even after taking the belt off.Any ideas? clothes caught between inner and outer Drum, you have to get it out !good luck eire. Why my lg ...
Question about Washing Machines
...it an IF THIS MIGHT HELP LEMME KNOW This sounds potentially ominous as it could be that the inner drum is catching on the inside of the outer tub which is often covered in gunge. As clothes are ...
bosch wfk 2800 drum makes a noise when turned around when drum turns around it makes a noise as metal on metal, however this only happens with the drum in one particular position. I hear the noise ...
drum will not move first of all my wt540 AQUARIUS HOTPOINT MACHINE,was making a very loud noise when on spin,like banging against something,now the drum will not move. please help. Try to remove drum ...
Drum will not turn. I started a cycle. The drum filled with water as usual but the drum won't turn. It can't be turned manually either. Sounds like you've got something stuck in between the drum and ...
Question about Frigidaire Washing Machines
turning. If the drum moves suddenly, suspect the drum bearing. If it slowly moves up or down during turning, suspect a bent shaft on the drum. In either case, it is a major teardown to remove the drum
65 questions posted
Usually answered in minutes!
522 Questions
457 Questions
351 Questions
272 Questions
222 Questions