Bosch Classixx WFL 2066 Front Load Washer "washer gentle wash flashing" Questions

...wash and spin lights flashing. Door locked and cannot get clothes out I just had this problem! To get the clothes out, open door manually (follow answers on other threads here about opening toe panel ...

washer. Has a large load size been used with a gentle wash setting? Gentle wash cycles such as Perm Press, Delicates, Hand Wash, and Wool/Silk should only be used for smaller loads. Because the cycles

...flashing symbol Common error with front loaders is the door interlock. Make sure the door is positively closed. A gentle open hand push at the erea of the door lock often gets a machine started. ...

...washer for 10 seconds and retry the wash cycle. There are filters on the inlet hose connections of the washing machine. If clogged, water will not flow through these filters into the washer. ...

...flashing slow ? check pump/filter/outlet hose for blockages. if ok, check pressure switch (disc shaped item at top of machine with 4? wires and a tube) by blowing into it gently - should hear clicks, ...

...wash cycle this code will come up. 1) water was too cold or hot when it filled the washer. 2) you have a bad or unplugged connection of the thermister.. 3 you have a faulty thermister.. hope it helps ...

...wash' cycle finishes, the machine stops at the 'rinse and spin' cycle, and the 'prewash' LED flashes. Additionally, the machine makes a different noise when it stops at the 'rinse and spin' cycle. ...

...wash cycle. Whirlpool Duet Washer 9100 (5 1/2 years old) stopped 3 minutes intowash cycle and is flashing the time remaining. Door will open andbuttons workbut the washer won't start. I tried holding ...

...gentle. Spin cycle and braking are fine. Motor status light flashes four times. What is the faulty area? The shaft assembly, or the motor? Thanks! check the 4 rubber cords at the top of the tub. If ...

...washer keeps flashing f11 i never used this washer during install the washer lost power because of power outage tried to restart and now it displays f11 please help random issues with bad solder ...