Bosch Classixx WFO 2866 Front Load Washer "control board" Questions

Ad

Question about Kenmore Washing Machines

1 Answer

control board failed, wire off pump or pump Replace console control board, wire or defective. pump. E24 Drain pump relay on control board failed. Replace console control board. E31 Pressure sensor not

Ad

Question about Frigidaire Washing Machines

1 Answer

control board failed. Replace control board orwire. E24 Drain pump relay on control board failed. Replace control board orwire. E31 Pressure sensor not communicating with control board. Refer to test

Ad

Question about Frigidaire Washing Machines

3 Answers

control board failed. Replace control board orwire. E24 Drain pump relay on control board failed. Replace control board orwire. E31 Pressure sensor not communicating with control board. Refer to test

Question about Frigidaire Washing Machines

4 Answers

control board failed. Replace control board orwire. E24 Drain pump relay on control board failed. Replace control board orwire. E31 Pressure sensor not communicating with control board. Refer to test

Question about KitchenAid Washing Machines

1 Answer

control board and the motor control board. This can be caused by: A loose or failed wire harness connection between the central control board and the motor control board. A bad wire harness connection

Question about Washing Machines

1 Answer

...control board & interface. You'll need to use a multimeter to check for the continuity between the Keypad and the control board. Inspect the wiring between the boards. Also check for any burnt ...

Question about Electrolux Washing Machines

1 Answer

...the Main Control Board and the Speed Control Board. Wiring bad, correct wiring problem. Wiring good, replace the Main Control Board. If the problem is not corrected, replace the Speed Control

Question about Bosch Washing Machines

1 Answer

control board and the Motor control board cannot be sent correctly. Potential causes: 1. Loose connections between the motor control board and the machine control board, or at motor 2. Machine control

Question about Washing Machines

1 Answer

control board and the motor control board. This can be caused by: A loose or failed wire harness connection between the central control board and the motor control board. A bad wire harness connection

Question about Bosch Washing Machines

1 Answer

...control board located on the bottom of unit called a motor controller ... it is possible the motor controller has failed.. prior to looking at it though check the main control board for failure such ...

Not finding what you are looking for?
Bosch Classixx WFO 2866 Front Load Washer Logo

72 questions posted

Ask a Question

Usually answered in minutes!

Top Bosch Washing Machines Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

jimorris77

Level 3 Expert

411 Answers

Dw Wooten
Dw Wooten

Level 2 Expert

227 Answers

Are you a Bosch Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...