Bosch Logixx WFT 2806 Front Load Washer/Dryer "f18 fault washing machines" Questions

Ad

Question about Bosch Washing Machines

3 Answers

...F18 fault Dear would you be so kind to let me know how I can repair the F18 fault. I don't have the manual anymore but I believe it is due to a drainage problem and I might just need to clean the ...

Ad

...fault code F18. The machine can only be turned off at the power point. 3. Any attempt to turn the machine off through the normal display switches sees a continuous F18 code flash and no response from ...

Ad

Question about Bosch Washing Machines

2 Answers

...Hope this helps (remember to rate and comment this answer). F18 is a drainage fault. The appliance has a set time to drain if it doesn't drain within that time F18 appears in display Diver ...

Question about Hotpoint Washing Machines

1 Answer

F18 fault.Nothing much worked except drain pump. Simple solution for me was: 1)disconnect power 2)take off top of machine(2screws at rear) 3)locate the connector which fits on the rear of the main led

Question about Hotpoint Washing Machines

3 Answers

...f18 flashing any ideas may be the pressure switch, or the rubber tube up to the pressure switch blocked with my wt965a hotpoint ultima lcd fault code f 18 it was a reverse polarity on the main ...

...fault F18 error code on my bosch washing machine flashing? During the wash cycle a f18 error code flashes. the cycle does not finish and the drum is fill of soapy water. Open the small flap at the ...

F18 fault, I have tried cutting out my mother in laws tongue but this has not cured the F18 fault, although I feel much better, Geoff Wow ,OK check it to out,first of all dyson is built for auto magic

Question about Washing Machines

1 Answer

i keep getting fault f18 for last 2 weeks On a Hotpoint that error means:- Communication Error - Book a washing machine repair.

fault code F18 frequently.Have cleaned the filter 3 times now recently(in the last 3 days) and is very clean but stopped again.Just emptied ll washing out of it and spun it to Fault code F18 again but

...do? Not good news - need to book an engineer, F18 is Communication error the main module could be at fault (PCB) This is located byhind the switches under the top, don't attempt to have a look ...

Not finding what you are looking for?
Bosch Logixx WFT 2806 Front Load Washer/Dryer Logo

222 questions posted

Ask a Question

Usually answered in minutes!

Top Bosch Washing Machines Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

jimorris77

Level 3 Expert

411 Answers

Dw Wooten
Dw Wooten

Level 2 Expert

227 Answers

Are you a Bosch Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...