Bosch Logixx WFT 2806 Front Load Washer/Dryer "dryer modes" Questions

dryer does not stop when I use it on the sensor dry modes. It drys just fine, but it keeps going and doesn't stop. Any help is greatly appreciated. The link below contains the service manual. Detailed

Excess noice when in dryer mode There is a very loud high pitch noice when in dryer mode. Do I need to worry? no not really its more then likely just your fan blades touching the sides just take the ...

dryer heater not working I have a Frigidaire front loading dryer that does not heat up. I have checked the thermistor and it is within specs. I can put it into test mode and the heater works fine but ...

...Please follow these procedures to activate the diagnostic mode on an Electrolux EWMGD70JPP0 dryer: Ensure that the dryer is unplugged from the power source and turned off. The "CANCEL" and ...

hotpoint hd640 washer/dryer no light on on/off switch,fuse ok ok make sure of a couple things waters on settings not in standby mode or safe mode clean all traps and filters circuit breaker not ...

...dryer modes in varying amounts. The cycle ends but the machine stays locked and have to run pump out mode to open door so the outlet cannot be blocked. Has anyone any solutions?. Cheers. Jay Open up ...

...dryer wont stop on the timed or automatic modes.If I want it to stop I have to either turn the knob to the stop position myself or open the door.After disasembly of the timer,I found several gear ...

...light blinks for 13 times. Per the service manual, if the mode light blinks 13 times, there's a bad dryer sensor or thermostat. I'm not sure if that related to your problem but it's a start. ...

wont't go to spin and dryer mode selecting water level, spin mode and dryer mode does not work. give you error messages blinking all lights you can change the control board . thanks .

Midea Washer/Dryer Combo isn't running the dryer cycle. When selecting a cycle of wash and dry, it only displays washing time and doesn't run the dryer. Dryer works in Dry Only mode. HELP! I would ...