...wash uses hot water wash and warm rinse. I have t set to hot/cold wash to get cold water wash. probably the water inlet hoses are hooked up cold water line to the hot water inlet and vice ...
...it stops and starts beeping, it will fill on a hot wash but wont fill to rinse as that's th cold water. MW512 The cold water solenoid valve went out. Be sure the cold water valve is turned wide
...cold water inlet valve doesn't open after pressing start in any mode (hot/cold, warm/warm, etc.) If I connect hot water hose to cold inlet and cold water hose to cold inlet, the hot inlet valve opens ...
Question about Zanussi Washing Machines
...cold water problem, it may have filled with hot water and gone through wash cycle but as it got to rince it only fills with cold water ,the buzzing may be the cold water solenoid staying open and if ...
...Cold water valve does not seem to be letting any water into the washing machine, so it does not spray rinse or deep rinse anymore. Swapped the cold tap to the hot water valve and can wash clothes now ...
...cold water first, then hot water for the rinse. Any ideas as to what could be the problem. It sounds like you have the hot and cold water lines to the washer reversed. Try turning off the tap for the ...
Cold water Washes When we use the cold wash cold rinse option it adds cold water then piping hot water is this normal? We have a wm1832cw front load LG wash machine. It is normal for the machine to ...
cold water fill does it heat to temputure requied? Hi, If your washing machine has inlets for both hot and cold water, you should connect both if possible. If you can only connect cold water, the ...
...cold water line and remove the hot water hose otherwise the hot water solenoid will open up and let in hot water,if you have cold water to both solenoids then you can get done what you want to ...
675 questions posted
Usually answered in minutes!
457 Questions
351 Questions
272 Questions
222 Questions
251 Questions