Bosch WFMC 3200 Front Load Washer "shock absorber" Questions

shock absorber do I need for Kenmore, Model 592-49045 washer? I need to change shock absorbers. When I open the machine there were two different model shock absorbers. Front two were DC66-00470A, rear

frequent out of balance problem model no. ghw9150pw1 All front-load washing machines have shock absorbers that are used to dampen the tub movement in the spin cycle. The shock absorbers or struts are ...

Shock absorbers are broken How do I replace the shock absorbers in the washer. just buy the new shocks(should by pair)I know they had 2 way one they have pin anoter kind they have clip lock to the ...

...washer hits the side of the machine, cause it to move. I've opened up the machine to look at the shock absorbers and springs. Springs look fine and so do the shock absorbers, they just seem to

...shock-absorber, would like to check if they are still in working order, the machine seems to vibrate while spinning. thanks, Ryan. Check the Vibration damper rods to be sure that... 1. They are there ...

On a Bosch washer (WFL2060), how do you remove the top part of the shock absorbers from the washing machine tub? Does anyonw know how to get the top end of the shock absorbers out?

I'm replacing worn shock/vibration absorbers/legs on a Bosch WFL 1880 AU 29 Front Loader and I can't free the shock absorbers from the outer plastic drum. They are attached with a white pin that look ...

Kenmore 110 25292500 shaking Check the shock absorbers. There are 4 shock absorbers on the bottom of drum two at front and two at the back of machine I think one or two of them are broken

replaced both "shock absorbers" and still get replaced both "shock absorbers" and still get banging noise Not balanced is why you are still getting the "knocking" sound. Use a level when you

...buy a new one? I think is is this model purchased in 1991 with the pull down door on the front. HAS SHOCK ABSORBERS WHEN THEY GO BAD ONE SIDE CAN LEAN ALSO CHECK FOR BAD OR LOOSE BALANCE WEIGHT. ...