Bosch Axxis+ WFR 2460 Front Load Washer "washer check water tap" Questions

Ad

Question about Bosch Washing Machines

1 Answer

...filter). Your washer manual shows you how to check/clean them. Also, you may have low water pressure during summer months due to lawn watering in your area that could cause this lower water

Ad

Question about Bosch Washing Machines

1 Answer

washer code le ? Possible Cause: ? Water supply is not adequate in area. ? Water supply taps are not completely open. ? Water inlet hose is bent. ? The filter of the inlet hose clogged. Solution: ...

Ad

..., the filter in the end of the hose is not blocked check that the tap washer is not jammed off in the tap as they can expand and not move up to let water in check water inlet solenoid is ...

Question about Bosch Washing Machines

1 Answer

...check cable connections on cold water solenoid valve inside rear of case if not fix replace cold water solenoid. cold water solenoid valve fails more often than hot, is used on every cycle so bnurns ...

Question about Washing Machines

1 Answer

...check hot and cold water are turned on. if no water, shutoff taps and disconnect both hoses at washer and the taps.[ most hoses have a wire screen in hose that may be plugged ]. if all seems clear, ...

...washer has been sitting for a few years. i don't know. check to see if cold water is availabe. shut off hot and cold supply taps. start washer to try to reduced pressure on rubber hoses. shut off ...

Question about Kenmore Washing Machines

1 Answer

...to change them. Also check you have a good flow of water from the hose into a bucket. If not you need a new Water Inlet Valve unit. Kenmore washer model 110 02980110 water inlet valve Google ...

Question about Bosch Washing Machines

1 Answer

...unplugged machine for a few minutes to see if some chip needed rebooting. machine is 6 months old check water inlet valve clean of rubbish from water inlet hose otherwise water inlet valve maybe ...

Question about Bosch Washing Machines

1 Answer

...check where the hoses connect to at the rear of the washer for sediment build up in the filter screens...also while hoses are disconnected from the washer while checking the screens also place hoses ...

Question about Kenmore Washing Machines

1 Answer

water into the washer. Any ideas? Hi from retired Englishman in SW France, If you have checked that the hot water tap is turned on fully and the hose is not kinked or squashed at the back, it is worth

Not finding what you are looking for?
Bosch Axxis+ WFR 2460 Front Load Washer Logo

125 questions posted

Ask a Question

Usually answered in minutes!

Top Bosch Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

NOEL
NOEL

Level 3 Expert

8606 Answers

Oliver Street

Level 2 Expert

73 Answers

Are you a Bosch Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...