Bosch Axxis+ WFR 2460 Front Load Washer "hot cold inlet valve" Questions

...hot/cold, warm/warm, etc.) If I connect hot water hose to cold inlet and cold water hose to cold inlet, the hot inlet valve opens but the cold valve doesn't open after pressing start. I get the FH ...

...hot cycle. Only cold water is connected. i dont even have hot hose connected---has worked fine for a year on cold/cold. Now has a small hum insted of filling. turn nob to hot and it fills Ok. When ...

Hot and Cold water inlet valves from the console and make sure the correct water inlet valve opens and fills the machine...........Rich and a p/n if you need to replace the water inlet valve assembly.

...cold. On "Hot/Hot" Water is hot. Mixing valve bad? Recently had hot water heater replaced. Trash in line blocking valve? I would pull the lines off the back and check the inlet filter on the hot and ...

...hot the cold water valve is stuck shut inside washer. Servicing Water Inlet ValvesIf the washer won't fill or fills very slowly, if it overfills, or if the water is the wrong temperature, the water ...

hot tap to the cold inlet on the back of the machine, and selecting cold wash. If you then get hot water coming in you will know it is almost certainly the solenoid inlet valve on the hot connection.

...Hot to Cold ?.. Cold to Hot. Now turn on only the Cold Water Source valve to the machine keep the Hot Water supply valve off. Set your FAV6800A Wash/Rinse selection to Warm/Warm. Now you are feeding ...

...hot and cold inlets of the valves. Then check the screens in the valves; if they're clogged, clean or replace them. If water doesn't enter the tub, set the temperature control to the HOT setting. If ...

...won't rinse! Replace the cold valve or change the wires from the cold to the hot valve...Some electronic machines can be damaged by doing this. Non electronic machines could be ok...Good ...

...hot or cold worked. So i placed the cold water wiring harness with the swaped relay onto the hot water side and i got hot water. So im sure that my hot water relay on the water valve is probably bad ...