cold water Behind the handle there is a dial to adjust water temp cold and hot you can remove it and replace it a 1/4 turn til you can get both cold and hot. It is a anti scald it may have been put in
...cold water handle? how do I remove the cold water handle on a Delta shower facet? You will need a set of std allan wrenchs.There should be a small set screw behind the portion of the handle that you ...
...cold water, Only hot water in showers. When i turn the single handle the water is cold until the hot water heater kicks in. Once the water turns hot, it stays hot. Even at the coldest setting, the ...
...cold water first and the further you turn it the more hot water you add with it. There is no cold water coming through just the hot. if the hot comes out when you first turn on you have hooked up hot ...
cold water.It's coming hot on both sides. I found the new replacement cartridge number to be 974-042 for the old 17196-0100k. I obtained the info from Price Pfister there Ph number 1-800-732
...cold water coming out of bath/shower, only really hot water Is it a Delta brand, single handle valve? If so, chances are you need a new "stem" and can be purchased at any plumbing suply store or home ...
...Cold water is fine, but, when i turn the handle to the position where the hot water is suppose to come out...nothing but a trickle. Valve issue or did I just not install correct? Any solutions? If ...
...cold water reversed. When the water is turned on, hot water comes out first. As the handle is turned further counter clockwise, it becomes colder until only cold as handle is turned to maximum ...
no cold water coming through to mix with hot need more info. faucet type, single handle or double handle
...cold water valve and has clogged it. The model number you have cited above is only for the trim (rather than for the valves behind it). Assuming that you have a Price Pfister valve, they don't have ...
78 questions posted
Usually answered in minutes!