Kohler Toilet - One Piece with Ingenium Flushing System - San Raphael by "san raphael adjust water" Questions

...do i adjust the water level in my San Rafael It is too high and going over the top of the tube should be a little screw on top of flush valve...or just bend ball arm alittle till the water level is ...

The water tank is over filling because the valve is not closing. I have ensured the float is adjusted to it's highest position The float neds to be further down. The further down the float is the less

...from the cistern. Presumably the water level is too high??? check if mechanism that releases water when you flush is tight so no water escapes. As for water level, you can adjust to less in the

...water keeps running into the toilet. How could I adjust the fill valve? Hi, Usually the problem is dirt in the fill valve and not an adjustment problem... depending on which valve you have it can be ...

...back up it makes a sort-of squeaking sound. How can I stop this? it's the fill valve that squeaks. Sometimes a slight adjust to the water level works, but most of the time it needs to be ...

...Adjust the float attached to the fill valve. Some simply slide up and down on a racheted adjustment bar. Others screw up and down for adjustment. Flush after each adjustment until the proper fill ...

...Is it a Kohler item or is it a Fluidmaster? Usually you adjust water height by turning a threaded rod that runs up and down. See page 5 of this pdf ...

The water does not refill in the tank after a flush. If I take the top off and push the lever in the tank the water starts. It acts like the float is not heavy enough to make the valve open. It was ...

i have a kohler model 703 # sb78drn, the toilet keeps running. i changed the flapper and now the toilet doesn't stop running. please help? Try adjusting the float level. The float is what tells the ...

...in the tank anymore Checked the valve and water goes to tank and does not fill tank. Can The whole guts in the tank be replaced ? flapper may not be sealing and letting tank fill up..adjust or ...