bowl does not fill up enough after flushing unless the lever is held down. What do I do to fix it? We have well water and a bit of mineral does build up on the fill tube. The only adjustment available
...bowl fill up more.....google your problem if you dont understand...depends on what kind of tower you have....should have teeth on the tower itself to make it fill more...try pulling up on the
...fill level valves, but does not put enough water in the bowl to clean properly. Have adjusted the water level to its highest level, still not filling bowl like it used to. Any ideas ? If it has a ...
...bowl. Inside the tank check the fill tube and make sure it is connected from the fill valve to the over flow tube. Also check the fill level in the tank and make sure water is up to the line on the ...
fill enough water in the bowl Check to see if there is not a clog in the trap. This could keep your bowl from filling up. Also check the flapper and see if it is staying afloat in the tank long enough
fill bowl. Fluid master makes a flapper that has adjustments on it to increase or decrease water used to flush. It has a dial to move on it this would be another option if the above tried doesn't help
Question about American Standard Home
...BOWL IS SITTING ON TILE ...PLEASE HELP THANKX The water in the tank is not filling to the water line, thereby not providing enough water to flush properly. Adjust the float so that the tank fills to ...
...bowl to fill with enough water so it will not splash? This is diagram of a typical toilet tank setup if the refill tube is not putting water into the flush valve as pictured the toilet will do what ...
after each flush. No leaks or other problems. Tank refills fine. Seems that the flapper doesn't float long enough to allow a sufficient amount of water to drain into the bowl before closing. Any ideas
86 questions posted
Usually answered in minutes!
50 Questions
35 Questions
40 Questions