Kohler Toilet - One Piece with Ingenium Flushing System - San Raphael by "adjust water level dual flush" Questions

...is the water level in the cistern the more water , the longer the flush before the reset ( shut off)action is activated adjust that by the float screw ot water level adjust screw on the inlet ...

How to adjust water level in this dual flush toiler Open the flush-container lid. You will see possible adjustments on the water level cut off.

...water in the bowl at rest can i adjust the water level in the bowl itself ( not the tank) order a water pump. so the preasure of the water can suppy the requirements pressure of your water ...

...respond to a lower water level. Try turning off the supply valve, flushing it and listen for water leaking past the flush valve after it closes. If it does, replace the flapper or adjust the

...water level in the tank is to low. if both buttons release the same amount of water then you have to increase the water level in the tank by adjusting the height of the floater on the inlet valve. ...

...Adjust that and make sure water level in tank is correct at least up to mark in tank or about 5/8" to top of overflow . Also check fill line and make sure it is connected to overflow also this allows ...

...LIKE YOU NEED TO ADJUST THE WATER LEVEL TO THE PROPER 1.6 GALLONS PER FLUSH,WHICH IS MARKED ON THE INSIDE OF YOUR TANK SOMEWHERE,CAUSE WHAT YOUR HEARING IS THE WATER RUNNING DOWN THE OVERFLOW ...

...water level in the tank is too high. Take the toilet tank top off and flush the toilet. When the water gets full and you hear the water stop ( except for your leak) look at the flush valve. Is water ...

...water level will leak down, causing constant refills), and it cant be TOO LOOSE or the toilet won't flush correctly. Since you didn't mention trouble flushing the toilet, I think that it may be a ...