Bulova Men's Watch "put back plate" Questions

...put the back plate back on the watch I would recommend you to go to a Juwelry, or a watchmaker and let him put the plate back on it. They might do it for free, or it will cost you 3-5 euros/dollars, ...

...put a screwdriver into to allow you to lever the back plate off if it has no screws then its just a push fit so just pry the back off and this will give you access to the battery then like above the ...

...put in the notch and twist upward, the back should either come off or move in that derection. Now if you cant see a lip, use a razor blade and in betwen the casing and the back plate insert the razor ...

...back plate on a Dakota time/date warch? Snap back in the back plate after replacing battery - with equal strong pressure on sides of watch. Tried many posirions - won't click on firmly. Some of these ...

put gold finish back on costume jewelry? Usually gold plating is done through a process called electrolysis , ideally you should search for someone who specialises in electrolysis or gold plating , no

put the back cover on again, only to find the alarm beep wasn't working. The alrm test and also when using the stopwatch it would normally beep when pressing the buttons but it doesn't make a sound. I

back plate. use the sticky part of a post it note I had the same problem with mine. I took off the back plate and turned it 180 degrees so the "E" on the back plate is now right-side up when the watch

...put it back but can not get it to work now. I just need a picture to show me how the silver and gold parts lay. Debbie Here is a video that shows the entire process of replacing the battery in the ...

steps in reverse to put the watch back together. You may have some difficulty getting the back plate back on, but I just pressed one side in and held it while I tapped the other side down with my fist

...put back the back plate of my timex watch but is is stubornly refusing to be back on. What can I do? Procedure please? Jack mcdevito75 here, This can be a problem, the tolerances between the back ...