Kirby Heritage II Vacuum "reverse motor" Questions

...takes place after adjusting past the smallest possible forward stitch. At no time does the machine motor ever run in a reverse direction. Look for an adjusting lever that controls stitch

...it to blow in reverse. I am I am trying to get it to blow in reverse. I am trying to blow up a mattress Unfortunately these vacuums do not blow in reverse unless you change the polarity of the

...reverse, but the motor stops when the handle is pressed forward. I dismantled the switch in the handle & did not expect the magnetic proximity type sensor. Not fully sure how best to troubleshoot the ...

...motor is running in reverse for whatever reason ,could the motor be DC and somehow the rectifier has gone wrong ,what voltage is this machine i wonder ,like 220c AC input but with a DC motor for some ...

...cleaner repaired. They changed the belt and motor but it dosen't pick up now. could they have reversed the wiring on the motor and made it rotate in the wrong direction? take back to repair

...reverse, so the motor doesn't reverses to close tg He door, isatead it wants to keep going up, but it is maxed out is it the capacitor? Or something else ? Likely something else. Look at the ...

...motor and gasket assm, and then the fan has a reverse thread on the plastic fan and you would unscrew the fan after removing the belt pulley. Then you would screw on the new fan, belt pulley, replace ...

...that is preventing me from doing this. Also the motor seems to be burning but I think it's because ther is something in there clogging it up. check to see if it has reverse threads, Most ...

...those entire switches until getting used to it. Another note that if you get the motor wires reversed when plugging them into that switch......it reverses the motor and will blow instead of ...

...FAN REMOVAL HOW DO YOU GET THE FAN OFF THE MOTOR SHAFT The nut is reverse threaded from what normal nuts and bolts are threaded. To loosen it, you need to act like you are going to tighten it