Kirby G6 Bagged Upright Vacuum "brush wont turn" Questions

Ad

...wont turn even after cleaning hoover steamvac f5914-900 agitator brushes wont turn even after cleaning filter. the brushes will not turn even wen the switch is turned on the gear that the brushes fit ...

Ad

Question about Hoover Vacuums

3 Answers

...brush wont turn I had the same problem on two different models with the spin brush system,,,and on both it was a steel bearing inside the spin brush motor that had got rusty from mouisture and froze ...

Ad

...brush wont turn the brush on the vacuum wont turn and i just got a new belts. It's a hoover with a wind tunnel. (12 amps) how do i fix it? Make sure the vacuum is on the carpet setting..the brush ...

Question about Dyson Vacuums

1 Answer

Brush Bar wont turn My brush bar wont turn. It is not blocked or clogged. I have taken it out. The drive does not seem to work. Once you put it back together recline the vacuum as normal use and turn ...

Question about Hoover Vacuums

1 Answer

...wont turn belts not broke Check that the brushes are not jammed up with hair and fluff. Remove the brush from the housing and clean throughly including the bushes/inserts and belt Hope that ...

Question about Vacuums

1 Answer

...is good ..will turn by hand but motor wont turn it.. Check that the belt is not too slack and that the brush bearings are not too tight, or that some lint or thread is caught around the brush

...wont turn The brushes won't turn you can turn them manually but they don't turn with the machine Hey Brenda! Here's a link to troubleshooting steps for the brushes not turning. ...

Question about Dyson Vacuums

1 Answer

...brush wont turn I had a big clog in the hole from the bottom (where the brush is) to the inner part. I unclogged that and cleaned the brush. Now I have good suction but the brush still wont turn. You ...

Question about Dyson Vacuums

1 Answer

...wont turn It could be one or more of a few causes. Easiest to check is the belt and/or brush roll. There are two switches for the brush roll. Both must be working properly. One is by the main power ...

...BRUSH MOTOR WONT STAY RUNNING. TURN DC 17 UPRIGHT BRUSH MOTOR WONT STAY RUNNING. TURN ON AND IT RUNS FOR 5 - 8 SECONDS AND SHUTS OFF. WAIT 5 SECONDS AND CAN TURN ON AGAIN BUT SHUTS BACK OFF. have a ...

Not finding what you are looking for?
Kirby G6 Bagged Upright Vacuum Logo

238 questions posted

Ask a Question

Usually answered in minutes!

Top Kirby Vacuums Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Paul Bade

Level 3 Expert

1818 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Kirby Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...