Husqvarna Craftsman 36cc, 16 In. Gas Chain Saw "stop" Questions

Chain stops moving when placed onto wood Chainsaw engine runs normally, chain stops when placed onto wood surface. Lift it off and chain travels normally, stops at wood contact. Previously had problem

I need a piston stop for a craftsman finish nailer part number4573.00 sears states they are not being made anymore do other nail guns use the same part I am not familiar with nail guns but if there is

have 350 saw and the stop button does not switch of the saw Inow have to pull the choke out to stop the engine.can you advise please. Thanks John Mckenna This is caused by either a faulty stop switch

Stop switch The stop switch broke off on my Husqvarna 36/41, 16'' bar and I need to know where the hookup is one end of the blue wire goes to the ignition coil and the other end goes to the stop ...

should kick back bar stop chain when forward or back? I think stop is forward, being designed to stop the chain if your hand slips off the handle. --W/D--

stop light not workin on the jeep 2004 need to specify if upper stop or regular stop/turn light

Pole saw stopped. May be in motor as sparks were seen when it stopped. Should I try to find someone to repair or re-purchase ??? My Remington 10" pole saw just stopped. Seems to be the motor (saw ...

...to remove drive sprochet nut SL4 saw Hello Rndrosse, You need to purchase a tool called a piston stop. You remove the spark plug and replace it with the piston stop. The piston makes contact with ...

Runs for short period then stops Will start then run poorly for very short period then stop. Choke dwill make it run very fast but it still stops. Hi abob