Husqvarna Craftsman 36cc, 16 In. Gas Chain Saw "high low idle adjustments" Questions

Ad

...low and high throttle performance...you only need to get it started and then slowly turn the "L" control until it idles smoothly..then move on to the "H" control and while going from low idle to high ...

Ad

...high speed and low speed mixture screws right in[gently]then out 2.5 turns.start it up,screw the idle screw up till it will idle,then adjust low speed mixture screw in or out so you get the highest ...

Ad

Question about Poulan Garden

1 Answer

high, and low.. if you look air filter cover you will usually see three holes and the high and low will usually have plastic covers on it.. adjust the low 1/4 of a turn and the idle screw in about 1/4

Question about Garden

1 Answer

...high fuel/air mix. Adjust the low fuel/air mix screw until it will idle un-added with the throttle then adjust the idle on the throttle to get a good idle speed. Next adjust the High fuel/air mix ...

Question about Husqvarna Garden

2 Answers

...high L is Low for the air mixture of the idle. H is high; L is low; T is throttle, throttle is your rpms. On the 'T' turn it clockwise until the chain starts moving. Then turn it counter-clockwise ...

Question about Stihl Garden

1 Answer

...the Carb Killers. You need a rebuild kit not just disassemble and clean.You have IDLE ADJUST   Low Speed adjust and High speed adjust. Low and High speed adjust have nothing to do with

...high and low adjustment screws, tighten the screws in until they stop, don't force the screw after it stops. Back each screw out 1 1/2 turns. The engine will start and run here if everything else is ...

...low-end and high-end operation. Special tool may be required, there are about a half-dozen screw head standards. Check eBay for tool. Get the engine to run and idle fast (idle adjust) so it doesn't ...

low and high speed jets you should always count the number of turns it takes to lightly seat the idle mixture screw and high speed needle adjusting screws. Be sure to write the number of turns down on

low and high speed jets you should always count the number of turns it takes to lightly seat the idle mixture screw and high speed needle adjusting screws. Be sure to write the number of turns down on

Not finding what you are looking for?
Husqvarna Craftsman 36cc, 16 In. Gas Chain Saw Logo

153 questions posted

Ask a Question

Usually answered in minutes!

Top Husqvarna Garden Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Husqvarna Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...