Husqvarna Craftsman 36cc, 16 In. Gas Chain Saw "chainsaws high low settings" Questions

Ad

Question about Homelite Garden

1 Answer

high/low settings for the carb. older 33cc with 16" blade Homelite 33cc 16inch Hi, most chainsaws start with carb settings at 1&1/4 turns out( hi+lo) usually once the chainsaw has been run in

Ad

LOW and HIGH speed screw settings what are the LOW and HIGH speed screw settings for a Ryobi RCS4040 Chainsaw you those to adjust the carb hi is balls out running , sometimes it sounds sick or ...

Ad

...066 MAGNUM CHAINSAW JUST WONDERING IF YOU CAN TELL ME HOW MANY TURNS THE MIXTURE SCREWS SHOULD BE SET AT one turn high and low 66 has compesator carby willrun rich up high but will lean under ...

...high rev setting the "L" is the low or tick over setting and there set up when the engine is hot and running,,,first the high rev ste up tweek the screw till the engine is running at full revs then ...

...on a walbro carberator wa19 on the needle on a poulan chainsaw xxv? The chain dies out when it is under cut or high rpms Initial setting is one full turn on low and high side. Fine tune from

...high and low scews With the saw warmed up adjust the low for best idle. Adjust the high for best speed then adjust a little richer from that point. Caution......Running at best speed (power) settings ...

to set you low end.  The high end of course would be set with how high you want the RPM. With this side of it you need to check the manufacturers notes for how high. Too high is bad for the motor

Question about Garden

1 Answer

...chainsaws have electronic ignition, so it is easier for test. Most of carburator has three buttons to adjust. L (low), H (high) for fuel injection at low and high speeds. There is also a minimum (the ...

...high and low I have a poulan 2550 chainsaw trying to to set high and low fuel settings starting settings are 1 turn on high side and 1 turn on low side.most likly you will be at 1 1/2 on low side and ...

Question about Poulan Garden

1 Answer

high and low adjustment screws;however the cover over the carb. seems to have an effect before and after adjustments are made to the general performance of the way she runs once warmed up. my question

Not finding what you are looking for?
Husqvarna Craftsman 36cc, 16 In. Gas Chain Saw Logo

153 questions posted

Ask a Question

Usually answered in minutes!

Top Husqvarna Garden Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Husqvarna Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...