Husqvarna Craftsman 36cc, 16 In. Gas Chain Saw "chainsaw oil coming bar" Questions

Ad

Question about Poulan Garden

1 Answer

...chainsaw oil leak Poulan Chainsaw 3816. The bar oil comes out very fast and leaks out. I've taken off the bar, chain, and cover so after starting it up I can see the bar oil coming out of a hole. ...

Ad

the bar off, push the oiler button. You should see where the oil comes out. Re-install the bar so the oil transfer hole in the bar lines up with the source hole from the pump. Should work fine. Cheers

Ad

...chainsaw. Make sure the oil tank is full but don't reassemble yet. Start the chainsaw without the bar and watch to see if any oil is coming out of the little hole or slot above the bar bolts. Check ...

Question about Poulan Garden

1 Answer

...comes loose and burns at wood. also get alot of smoke from chain area Insufficent chain oil to the bar, check there is oil in the oil tank, remove the bar and clean out the delivery hole in the

Question about Garden

2 Answers

...oil from chainsaw I have a stihl chainsaw. The chainsaw oil is not being released from the oil tank to lubricate the blade. I have tried putting a piece of wire down the hole in case it is blocked ...

Question about Husqvarna Garden

1 Answer

...and bar is off you can CAREFULLY run the saw to see if oil is coming out if the pump. In some cases you need to remove the tin shield that is behind the bar and clean out the oil passages in

Question about Garden

1 Answer

...chainsaw bars and chains and oil the chain and bar with it while you cut your wood...give it a squirt of oil about every two minutes of cutting, adjust the lenght of time if you need to 2...type of ...

...bar off and make sure the oil holes are clean, also clean the area where oil comes out, if that dont help u can turn the oil up, you may need to thin out the oil with a little gas to clear out ...

Question about Homelite Garden

1 Answer

oil not coming out on the bar when chainsaw running, the bar get hot and it seen like no oil coming out on the bar. Check chain oil reservoir, assuming it is full and pathways are clear, your oil pump

Question about Homelite Garden

1 Answer

chainsaw will not start. There is fuel coming out of the of the bar. It ran for a while, maybe three or four small jobs. The saw will not start. Although I am no expert I did work for Magneto Powe and

Not finding what you are looking for?
Husqvarna Craftsman 36cc, 16 In. Gas Chain Saw Logo

153 questions posted

Ask a Question

Usually answered in minutes!

Top Husqvarna Garden Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Husqvarna Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...