Husqvarna Craftsman 36cc, 16 In. Gas Chain Saw "carburetor engine" Questions

...engine is regulated by the carburetor, and the carburetor in a Stihl chainsaw is factory-adjusted to provide the best performance.... You'll find three adjustment screws for the carburetor, usually ...

engine stalls. I have cleaned and gapped the spark plug, replaced the air filter, emptied and refilled the gasoline tank with fresh, unleaded regular gasoline (no ethanol), made sure the carburetor is

CARBURETOR AIR FLOW AS OPPOSED TO OTHER ENGINES. DO YOU THINK THERE SHOULD BE A VALVE SPACING TEST DONE? THANKS FOR YOUR REPLY! In a 2-stroke engine, the valving is done by the mechanical relationship

...carburetor is off of the engine, check the impulse passage that runs from the cylinder, through the heat insulator block and gaskets, to the back of the carburetor. Check the condition of the ...

...carburetor, but the engine still doesn't run, then remove the carburetor float bowl, the float, and needle valve. The needle valve can sometimes stick closed, or debris can block entry of fuel into ...

...engine starter (ether) in the carburetor and it runs briefly, the carburetor is probably gummed up. You can possibly rebuild the carburetor, but you need the precise model of rebuild kit matched to ...

...Is the carburetor firmly attached to the engine? Fuel and spark at the right time makes it go! Try squirting a little fuel into the carburetor throat. Might be loose screws on carburetor

...Stihl bulb won't pump up, or start. I have to feed gas into the air cleaner to keep running. Your carburetor is clogged, probably due to using old fuel or allowing it to sit unused for several

...of the carburetor for flexibility, and no cracks or holes. When the carburetor is off of the engine, check the impulse passage behind the carburetor for air leaks--no bad gaskets. Hope this

...engine carburetor to make sure the material is flexible with no cracks as this diaphragm directly affects fuel mixture settings. If they are 4-stroke engines, take the carburetor off and remove the ...