Husqvarna 450 e-series 18" Chain Saw "chainsaws stops turning" Questions

echo sc 4400 Chainsaw blade turns constantly If lowering idle speed does not stop chain broken clutch springs will cause chain to not stop turn down your idle

Husqvarna Chainsaw Chain stopped turning Chainsaw chain stopped turning. After cutting about 5 limbs, on the next limb halfway through, the chain stopped. It was smoking on the inside part of the ...

changed blade on echo edger now the blade turns non stop without giving it gas Back off the idle speed screw CCW until the blade stops turning, but the engine keeps running. Hope this helps!

Try turning the idle speed screw CW (not the jet screw marked L) one full turn to increase speed. Normally, this is set so that the chain stops moving, but the engine continues to run. Hope this helps

chainsaw blade turns constantly, even when idling. If the chain turns on the bar when the saw is at idle, then the idling speed is still too fast. If you turn the idle screw down until the chain stops

...old chain. Chain lock is off pull the chain clutch back towards the handle it is not a chain lock but a clutch release that stops the chain from turning pulling it back engages the clutch to drive ...

the chain on my 16 inch electric homelite chainsaw starts moving but when starting to cut, it stops running even though the motor is. if i manually rotate the chain and then plug the saw back in and ...

after installing the chain on the new poulan chainsaw, the sprocket gear will not turn, I made sure the cover nuts were loose upon tightening the chain but the sprocket gear will not turn with chain ...

changed carb on a stihl 025 from a single set screw to a double set screw . what settings do i need to start initially on the needle setting closest to engine(air) it is turn clockwise till it stops, ...

Chainsaw electric motor jammed Was sawing a root. Suddenly the chain saw stopped. The motor cannot be turned by hand. Remove the chain, then see if it will turn over by hand. Does it have a ...